The Way To Stop Pe Pipe Fitting – Brass Gate Valve

A Brass Gate Valve is a type of fluid-regulating valve that turns the flow of water and other fluids on and off. They are intended to be fully open or fully closed, functioning like an on/off switch in an electrical system. Gate valves often are found as the main shutoff in a household water supply system. They also are found in industrial facilities to control fluid flow. Gate valves can be made of iron, steel, bronze or plastic.
1 Turn the water on to the house at the city shut-off valve. Study the gate valve. If the circular valve handle cannot be turned counter-clockwise anymore, the valve is fully open, and water is passing through the valve to the various household water fixtures.
2 Check the water and ensure it is passing through the valve by turning on faucets or other water appliances. Note if the water proceeds at standard pressure.
3 Slowly turn the circular gate valve handle clockwise, until it is tight and cannot be turned anymore. When tight, do not force the handle closed. The wedge-shaped gate in the center of the valve,a kind of Pe Pipe Fitting, has fully moved across the water flow path, stopping water from entering the household pipes.
4 Open a faucet to check that the valve is closed. If closed, only a trickle of water may escape from the faucet, before all water ceases.
5 Turn the faucet off.
6 Go back to the gate valve and move its handle counter-clockwise, until it cannot be moved anymore. The valve is now fully open again, with water flowing through the pipe to the various water fixtures. Turn on a faucet to check that the water pressure in the pipeline is back to normal pressure.
The article comes from Brass Plumbing Fitting.