Fish Extract Spray Dryer
Basic Info
Model No.: LPG
Product Description
After been filtered and heated the air enters into the air distrbutor on the top of the dryer.The hot air enters into the drying room in the spiral form and uniformly. Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely fine mist liquid beads.Throug the very short time of contacting the heat air,the materials can be dried into the final products.The final products will be discharged continuously from the bottom of the drying tower and from the cyclones. The waste gas will be discharged from blower.
Changzhou Suli Drying Equipment Co., Ltd. Professional production Fishmeal spray drying machine, Fishmeal spray dryermachine, Fishmeal spray drying, Fishmeal spray dryer equipment
Fish Extract Spray Dryer Machine equipment Performance characteristics
◎ Drying speed is fast, the surface area of material liquid is greatly increased after atomization. In the hot air current, 95%-98% of water can be evaporated instantaneously, and the drying time is only a few seconds. It is especially suitable for the drying of heat-sensitive materials.
◎ The product has good uniformity, fluidity and solubility, and the product has high purity and good quality.
◎ The production process is simplified and the operation and control are convenient. For liquids with a moisture content of 40-60% (up to 90% for special materials), the liquid can be dried once into a powdered product, without crushing and screening after drying, which reduces production processes and improves product purity. The product particle size, bulk density and moisture content can be adjusted within a certain range by changing the operating conditions, and the control and management are very convenient.
LPG High-Speed Fish Extract Spray Dryer Adaptable materials
Chemical industry: Sodium fluoride (potassium), basic dye pigments, dye intermediates, compound fertilizers, formaldehyde silicic acid, catalysts, sulfuric acid agents, amino acids, white carbon, etc.
Plastic resin: AB, ABS emulsion, urea-formaldehyde resin, phenolic resin, adhesive (urea) formaldehyde resin, polyethylene, polyvinyl chloride and so on.
Food Industry: Fat-enriched milk powder, Taro, cocoa powder, milk replacer, blood powder, egg white (yellow), etc.
Food and plants: oats, chicken juice, coffee, instant tea, spices, protein, soybeans, peanut protein, hydrolysates, etc.
Sugars: Corn syrup, corn starch, glucose, pectin, maltose, potassium sorbate, etc.
Ceramics: Alumina, tile materials, magnesium oxide, talcum powder, etc.
Ordering Information
◎ material liquid name, physical properties: solid content (or water content), viscosity, surface tension, PH value.
◎ Powder capacity after drying, allowable residual water content, particle size, maximum allowable temperature.
◎ Production, daily opening hours.
◎ Available energy: steam pressure available, capacity, available for coal, oil, gas.
◎ Control requirements: whether the inlet and outlet temperatures need to be controlled.
◎Powder collection requirements: Whether or not to install a bag trap, the environment requires exhaust emissions.
◎ Other special requirements.
Technical specifications
Model / Item / Parameter | 5 | 25 | 50 | 150 | 200-2000 |
Inlet temperature | 140-350 Automatic Control | ||||
output temperature | 80-90 | ||||
Maximum moisture evaporation (kg/h) | 5 | 25 | 50 | 150 | 200-2000 |
Centrifugal spray head drive form | Compressed air drive | Mechanical transmission | |||
Maximum speed (rpm) | 25000 | 18000 | 18000 | 15000 | 8000-15000 |
Spray disk diameter (mm) | 50 | 120 | 120 | 150 | 180-240 |
Heat source | Electricity | Steam + electricity | Steam + Electric, Fuel, Gas, Hot Air Furnace | ||
Electric heating maximum power (kw) | 9 | 36 | 72 | 99 | |
Dimensions (length × width × height) (m) | 1.8×0.93×2.2 | 3×2.7×4.26 | 3.5×3.5×4.8 | 5.5×4×7 | According to the actual situation |
Dry powder recovery (%) | ≥95 |
Note: The amount of water evaporation is related to the characteristics of the material and the hot air inlet and outlet temperatures. When the outlet temperature is 90 o C, the water evaporation curve is shown in the above figure (for selection reference). As the product is continuously updated, the relevant parameters are changed without prior notice.
Technical specifications
size | A | B | C | D | E1 | E2 | F | G | H | I |
LPG-25 | 1290 | 3410 | 4260 | 1800 | 1200 | 1200 | 1,000 | 1700 | 1300 | 1550 |
LPG-50 | 1730 | 4245 | 5100 | 2133 | 1640 | 1640 | 1250 | 1750 | 1800 | 1600 |
LPG-100 | 2500 | 5300 | 6000 | 2560 | 2100 | 2100 | 1750 | 1930 | 2600 | 1780 |
LPG-150 | 2800 | 6000 | 7000 | 2860 | 2180 | 2180 | 1970 | 2080 | 3050 | 1960 |
LPG-200 | 2800 | 6600 | 7300 | 3200 | 2300 | 2300 | 2210 | 2250 | 3050 | 2100 |
LPG-300 | 2800 | 8000 | 8700 | 3700 | 2800 | 2800 | 2520 | 2400 | 3040 | 2250 |
Product Categories : Drying Series > Spray Dryer